Xerox 135, 100 3. Sun Blade 2500 specifications, NOTE Add 3 in, cm to stand’s, depth with channel

Controller requirements and specifications

Table 5-3. Sun Blade 2500 specifications

	Dimensions (depth,		Heat
Device	width, height)	Weight	dissipation	Power requirements	Cable lengths
Stand	d=35.5 in / 90.2 cm	195 lbs /	---	---	---
	w=30 in / 76.2 cm	88.6 kg
	h=38.25 in / 97.2 cm
	NOTE: Add 3 in /
	7.62 cm to stand’s
	depth with channel
	interface board and
	channel cable
	connector box.
Processor	d=19.3 in / 49 cm	49.6 lbs /	1,570 BTU	60 Hz:	Power: 8 ft. /
	w=8.3 in / 21 cm	22.5 kg	per hour	100 to 240 VAC,	2.4 m
				15 amp, 0.4 KVA,	Interface to
	h=19 in / 48.3 cm			5-15 NEMA
					printer: 20 ft. /
				50 Hz:
					6.1 m usable
				100 to 240 VAC,	length
				15 amp, 0.4 KVA
Monitor	d=10 in / 25.4 cm	18 lbs /	408 BTU	100-120 ~ VAC,	Video cable to
	w=17.5 in / 44.5 cm	8.2 kg	per hour	1 phase, 50-60 Hz,	processor:
				3.0 amp, 0.4 KVA	70 in / 1.8 m
	h=18.5 in / 47 cm			200-240 ~ VAC,
				1 phase, 50-60 Hz,
				2.0 amp, 0.4 KVA
Quarter-inch	W=7.5 in / 19 cm	8.4 lbs /	---	100-240 VAC,	SCSI cable to
cartridge	H=2.7 in / 7 cm	3.8 kg		47-63 Hz,	processor or
tape drive				max. 850 ma - 1.45	additional SCSI
	D=13 in / 33 cm			amp	device:
					2.62 ft / 0.8 m
18/36 track	W= 8.54 in / 21.7 cm	31 lbs /	---	88-264 VAC,	SCSI cable to
cartridge	H= 5.39 in / 13.7 cm	13.4 kg		48-62 Hz,	processor or
tape drive				max. 35 amp	additional SCSI
(optional)	D= 21.9 in / 55.6 cm				device:
					16.4 ft / 5 m,
					32.8 ft / 10 m, and
					65.6 ft / 20 m
External hard	W=7.5 in / 19 cm	8.4 lbs /	---	100-240 VAC,	SCSI cable to
disk drive	H=2.7 in / 7 cm	3.8 kg		47-63 Hz,	processor or
				max. 850 ma - 1.45	additional SCSI
	D=13 in / 33 cm			amp	device:
					28 in / 71 cm

5-10 Installation Planning Guide