Xerox 115, 100, 155, 135 manual System connections, Cable lengths, 1. Power cable lengths

7.System connections

This chapter provides cable requirements for your Xerox DocuPrint 100/115/135/155/180 EPS. It also provides information about channel-attaching your printer. To ensure all of your cable requirements are met, work with your Xerox representative.

Cable lengths

Cable lengths are important considerations in planning your layout, as components can be separated only up to the length of the data interface cables that connect them.

Cables supplied with the printer are long enough to meet the needs of most installations. Some of these cables are specific lengths to conform to engineering and safety standards.

Interface cable The printer and controller can be separated up to the length of the interface cables that connect them. The printer and controller are connected by a 20 foot / 6.1 meter cable, or an optional 50 foot / 15.2 meter cable.

Power cables The printing system power cable lengths are as follows:

Table 7-1. Power cable lengths

Power cable	Length
Controller	8 feet / 2.4 m
Printer	15 feet / 4.5 m

Installation Planning Guide 7-1