Xerox 100 Paper size and pitch mode minimum and maximum, Figure A-1. 8 pitch mode paper sizes

Supplies

Paper size and pitch mode minimum and maximum

The illustrations in this section show the pitch modes in which you can operate with the smallest and largest size papers supported by the printing system.

Using small paper Printing in 8 pitch mode provides the highest throughput speed sizes in 8 pitch available —up to 154 ppm for the DP135 printer and up to 206

mode ppm for the DP180 printer. (The DP100 printer does not support 8-pitch mode.) However, you should keep the following in mind when you select the paper you want to use for this mode:

•Paper sizes smaller than 8 inches / 203 mm in width are supported only when the optional 7 inch Paper Kit is installed on the printer.

•The leading edge of any paper used in the printer cannot be less than 10 inches / 254 mm long.

The following figure illustrates the maximum and minimum paper sizes supported in 8 pitch mode.

Figure A-1. 8 pitch mode paper sizes

1.Maximum paper size for 8 pitch mode

2.Minimum paper size for 8 pitch mode

3.Travel direction of sheets out of paper tray

A-6 Installation Planning Guide