Xerox 115, 100, 155 Other supplies, NOTE Dry ink toner yields are based on 7% area coverage

Supplies

Other supplies

This section describes the supplies other than paper that are necessary for installation and afterward. Your sales representative will help you place your initial supply order.

Dry ink

Dry ink (also called toner) is the black powder that forms the image on the printed page. There are three cartridges of dry ink in each carton. You should keep at least one extra cartridge on hand at all times. The disposable cartridges are easily changed with no mess. The consumption rate of Xerox dry ink is approximately one cartridge per 60,000 pages. Use only dry ink that is specified for use in the printer, as described in the consumable supplies table.

MICR dry ink MICR dry ink is the magnetic black powder which forms the image on the printed MICR document. There are three cartridges of MICR dry ink in each carton. The consumption rate of Xerox MICR dry ink is approximately one cartridge per 60,000 pages. Use only MICR dry ink in your MICR printer.

The dry ink that is used with the DP 100/115/135/155/180 MICR EPS is designed for MICR printing and does not function well when used in non-MICR systems. The same procedure used for non-MICR printing systems is used to add the dry ink to the 96/ 4635/180 MICR printer.

NOTE: Dry ink (toner) yields are based on 7% area coverage.

Your yield may vary, depending on coverage.

CAUTION

Use only MICR dry ink in the DP 100/115/135/155/180 MICR EPS printers. Do not use standard dry ink. MICR dry ink cannot be reused.

Installation Planning Guide A-13