GLOSSARY
format 1. Layout of a document, including margins, page length, line spacing, typeface, etc.
2.In data storage, the way the surface of a disk is organized to store data.
3.To prepare the surface of a disk for acceptance of data.
fuse To affix dry ink to paper by heat or pressure or a combination of both.
hard disk See fixed disk.
hardware Physical components (mechanical, magnetic, electronic, etc.) of a system, as opposed to programs, procedures, rules, and associated documentation. The hardware is operated by software and firmware.
HCF High capacity feeder. An optional feeder module containing two feeder trays that work independently with the standard feeder trays 1 and 2. The HCF increases the feeder capacity by approximately 2,000 sheets and allows automatic tray switching and increased uninterrupted printing time.
host Computer accessed by users which serves as a source of
host interface Connection between network and host computer.
identifier (id) Characters used to identify or name data and possibly to
indicate certain properties of that data.
image area Area on a physical page that may contain text or graphics.
implementation Process of installing system hardware and software. Also the process of converting a design into an actual working system.
impressions per minute (ipm) The number of pages (one side) a printer can print during the space of one minute. Used interchangeably with pages per minute (ppm).
interface Hardware that provides physical connection and electronic communication between two hardware devices.
Internet Protocol (IP) address Refers to an address of any host that uses TCP/IP network protocol.
IOT Image Output Terminal. See printer.
Installation Planning Guide |
