6.Printer requirements and specifications
This chapter provides power and space requirements for the DocuPrint 100/115/135/155/180 EPS printer. It also provides printer environmental specifications.
For information about controller power and space requirements, refer to the “Controller specifications and requirements” chapter of this guide.
Power requirements
Your printer has important power requirements that must be accommodated. These requirements are summarized in the table below.
For further details on power requirements, refer to the voltage charts and wiring diagrams that follow.
For details on controller power requirements, refer to the “Controller specifications and requirements” chapter of this guide.
Table 6-1. Printer electrical requirements
|
|
| KVA rating | Additional | |
Component | Voltage | Amp. service | (operating mode) | Requirements | |
|
|
|
|
| |
Printer 60 Hz | 120/240 VAC or 120/208 | 50 amp (Cord 1) | Operating: 7.3 | ||
(U.S. and | VAC (Cord 1) | 30 amp (Cord 2 | + .75 per middle | ||
Canada) |
| module stacker | |||
120/240 VAC or 120/208 | for DP 155 and | for DP 155 and | |||
|
| ||||
| VAC (Cord 2 for DP 155 | DP180 only) |
| DP180 only) | |
| and DP180 only) |
|
|
| |
|
|
|
|
| |
Printer 50 Hz - | 380, 400, 415 VAC | 30 amp | Consult local |
| |
WYE (Star) | (3 phase, 5 wire) |
| service |
| |
|
|
| representative |
| |
|
|
|
|
|
Agency certification: UL 478 and 1950, IEC 950, CE Mark,
CSA 22.2
Installation Planning Guide |