Printer requirements and specifications
Space requirements
You should consider the following factors when deciding where to place the printer hardware components:
•Adequate work space and service clearance around the equipment
•Proximity to electrical and network connectors
•Security of the work area. You may need to place the system in an area where you can restrict access to it. This may be important if your personnel need to print confidential documents or if you are concerned with unauthorized usage.
Dimensions and weights of the printer components are listed in this section, along with diagrams, to help you visualize the sizes and total space requirements.
NOTE: There must be a 78 inch / 198 cm vertical clearance throughout the entire area. In addition, your printer must be installed in a fixed location with a minimum clearance space of 36 inches / 91.4 cm around all sides of each piece of equipment for access by service personnel. In addition, there must be 50 inches / 126.9 cm clearance space in front of the printer.
For information on clearance space and other space planning considerations, refer to the “Space planning guidelines” section of this chapter. Contact your service representative if you have questions not specifically addressed in this guide.
Printer configurations available
The following configurations are available for the printer:
•Printer + inverter feeder/stacker + 1 feeder/stacker
•Printer + inverter feeder/stacker + 2 feeder/stackers
•Printer + inverter feeder/stacker + 3 feeder/stackers.
Measurements and a
Installation Planning Guide |