Xerox 155, 135, 115 manual Space requirements, Sun Blade 1000/2000 environmental requirements

Controller requirements and specifications

Sun Blade 1000/2000 environmental requirements

•Temperature: 32 to 104 degrees F / 0 to 40 degrees C

•Humidity: 5 to 80% (relative non-condensing)

•Altitude: 0 to 10,000 feet (0 to 3,050 m) above sea level

•Heat dissipation: 1,100 BTU per hour (processor and monitor)

For recommended environmental ranges for the printer work area, refer to the “Printer specifications and requirements” chapter of this guide.

Sun Blade 2500 environmental requirements

•Temperature:

–Without tape drive: 32 to 104 degrees F/0 to 40 degrees C

–With tape drive: 41 to 95 degrees F/5 to 35 degrees C

•Humidity: 10 to 93% (relative non-condensing)

•Altitude: 0 to 9842.5 feet / 0 to 3,000 m above sea level

•Heat dissipation: 1,570 BTU per hour (processor and monitor)

For recommended environmental ranges for the printer work area, refer to the “Printer specifications and requirements” chapter of this guide.

Space requirements

This section provides recommendations for placement of controller hardware components.

For printer component space requirements, refer to the “Printer specifications and requirements” chapter of this guide. Contact your service representative if you have questions not specifically addressed in this guide.

5-4 Installation Planning Guide