Controller requirements and specifications
Controller placement
WARNING
The controller must be positioned within the
The controller components are placed in the accompanying controller stand. You should consider the following factors when deciding where to place the controller and stand:
•There should be at least 36 inches / 15.2 cm of clearance on all sides of the controller stand.
•Adequate work space and service clearance around the equipment
•Proximity to electrical and network connectors
•Security of the work area. You may need to place the system in an area where you can restrict access to it.
Guidelines for controller placement
To ensure consistent performance and avoid any damage to equipment, follow these rules for placing the components of the controller.
Do:
•Use the controller stand that comes with your printing system equipment.
•Allow at least 6 inches / 152 mm of unobstructed space at the front and rear of the processor, so the fan and vents are not blocked.
The following illustration shows fan and vent locations on the front and back of the processor.
Installation Planning Guide |