Xerox 155, 100, 135, 115 manual Printer hardware specifications and requirements summary

Printer requirements and specifications

NOTE: These turning figures are based on inverter/feeder/ stacker dimensions of 28 inches / 71.1 cm by 32.25 inches / 81.9 cm.

Printer hardware specifications and requirements summary

The following table summarizes the specifications and electrical requirements of your printer hardware components.

Table 6-11. Printer specifications and power requirements

	Dimensions (width,	Total
Device	depth, height)	Weight	Heat dissipation	Power requirements
Printer with	W=151.2 in / 384 cm	2,588 lbs/	DP 100, 115, and	60 Hz:
inverter	H=59.6 in / 151.3 cm	1,174.9	135:	DP 100, 115, and
feeder/stacker	D=38.8 in / 98.6 cm	kg.	Operating:	135:
and one			28,140 BTU per hr	120/240 VAC or
feeder/stacker	Total space required		Standby:	120/208 VAC;
	(+ access):		4,454 BTU per hr	50 amp service;
	223.25 in W by 114 in		Energy Saver:	NEMA L14-50R;
	D / 567 cm W by		2,700 BTU per hr	KVA 7.3 (operating)
	290.3 cm D
			DP 155 and 180:	DP 155 and 180:
			Operating:	120/208 VAC
			32,770 BTU per hr	(182 V to 220 V),
			Standby:	KVA 7.3 (operating)
			4,454 BTU per hr
			Energy Saver:	Cord 1: 50 amp,
			2,700 BTU per hr	NEMA 14-50R
				Cord 2: 30 amp,
				NEMA 14-30R
				50 Hz:
				Consult your local
				service representative.

Installation Planning Guide 6-25