Supplies
•Transparencies: Must be the type designed for
Load transparencies with the opaque strip to the right. All printed transparencies are delivered to the sample tray.
As long as they meet your printer’s paper specifications, you can also use:
•Tinted paper: Available in a variety of colors, it has many uses, including calling attention to certain printed material, separating special sections, or dividing chapters of a report.
•Preprinted paper: May be letterhead, forms, or logos.
•Predrilled paper: Has a varying number of holes for use in binders or binder rings. Before loading predrilled paper, fan it to remove loose plugs that could cause paper jams. Load predrilled paper in the printer with holes to the right.
•Perforated paper
•
•Carbonless paper
NOTE: The printer can print on precollated or ordered stocks, including ordered tabs. However, jam recovery is not supported with these stocks.
Paper sizing and print speed
The printer paper trays have edge guide sensors that detect paper length and width. The system selects correct paper trays for the print job based on the paper size specified in the job, as follows:
•If an exact match is found, the print job continues.
•If an exact match is not found, the programmer can specify in the job for the printer to either:
–Stop printing the job and print an error sheet
–Print the data on an oversized sheet.
If you encounter any problems related to paper sizing, contact your lead operator, systems specialist, or service representative.
Installation Planning Guide |
