Controller components and options
5.Diskette drive
6.
7.
8.External fixed disk drive (optional)
9.Keyboard
10. Display monitor
The Sun Blade 1000/2000 contains the following hardware components:
•Processor (system unit) containing the following:
–One or two UltraSPARC III
•DP 100, 115, and 135: 1 CPU
•DP 155 and 180: 2 CPUs
NOTE: In XE, all printers use a dual CPU configuration.
–1 or 2 GB of memory (one or two
•DP 100, 115, and 135: 1 GB
•DP 155 and 180: 1 or 2 GB
NOTE: In XE, all printers use a 2 GB memory configuration.
–Hard disk drive
•Sun Blade 1000: 36 GB
•Sun Blade 2000: 73 GB
–
–Diskette drive: uses 3.5 inch, 1.44 MB,
–Ethernet
–Two Printer Controller Interface (PCI) boards to interface with the printer
–PGx64 video graphics board
•Universal Serial Bus (USB) keyboard and
•
Installation Planning Guide |