A.Supplies
This appendix provides information and specifications for media used with your Xerox DocuPrint 100/115/135/155/180 EPS printer. Instructions for ordering supplies are also provided.
Consumable supplies (those that are depleted during operation of the system), such as paper, dry ink, developer, fuser agent, etc., must be ordered for your printer. It is important that an adequate supply of these items be on hand for installation, and that your supply be maintained afterwards.
Paper and other throughput stocks
The success of any print run is greatly dependent on the proper selection, care, and handling of the stock used.
Selecting paper
Acceptable paper stocks and sizes
Select your paper carefully. If you do not use the proper paper, you increase the probability of paper jams and misfeeds. The stocks you use must meet the specifications set forth by Xerox for operability in the printer. For additional information about paper specifications, refer to Helpful Facts about Paper, delivered with your printer.
The printer accepts the following standard size
•7 by 10 inches / 178 by 254 mm (with
•B5: 7.17 by 10.12 inches / 182 by 257 mm (with
•US Letter: 8.5 by 11 inches / 216 by 279 mm
•US Legal: 8.5 by 14 inches / 216 by 356 mm
•A4: 8.27 by 11.69 inches / 210 by 297 mm
•B4 (European): 9.84 by 13.89 inches / 250 by 353 mm
•JIS B4 (Japanese): 10.12 by 14.33 inches / 257 by 364 mm
Installation Planning Guide |
