Xerox 135, 155 Controller components, Sun Blade workstation, Sun Blade 1000/ 2000 configuration

Controller components and options

Controller components

The controller consists of a specially-configured Sun workstation and uses proprietary Xerox hardware, firmware, and software. Your controller has one of two possible configurations, described in the following sections.

NOTE: Controller hardware configurations are subject to change, to keep up with technology advances.

Sun Blade workstation

The controller is based on either the Sun Blade 1000/2000 or the Sun Blade 2500, workstations with high-performance architecture for complex processing tasks.

Sun Blade 1000/ 2000 configuration

Figure 2-1. Sun Blade 1000/2000 controller

1.Controller stand

2.Mouse

3.18/36-track cartridge tape drive (optional)

4.Processor

2-2 Installation Planning Guide