Installation
4.Xerox personnel test the system and run sample jobs (30 minutes).
5.Xerox personnel conduct initial operations training (four to six hours).
6.Xerox personnel review preventive maintenance schedules and service call procedures.
Your responsibilities
Xerox personnel are responsible for the physical installation of the printer components and for loading the software and applications. You have the general site responsibility of ensuring that the right personnel, supplies, and network information are available.
At the time of installation, you should do the following:
•Make sure that your system administrator is available during the loading of software.
•For software loading purposes, be prepared to provide Xerox personnel with network information from the preinstallation worksheets. Refer to the Getting Ready for Installation manual for specifics regarding network information.
•Designate two client workstations for downloading Xerox client software if applicable: one for initial system validation and another for use in operator training provided by your systems analyst.
•If your system will be connected to an IBM host through a channel, provide the host channel address, channel unit address, and data transfer mode.
•If your system will be connected to an IBM host through Socket TCP/IP, provide the host IP address and port number.
•Check the documentation and software kits with their packing lists for completeness.
•Load Xerox client software on any additional client workstations.
Remember that you are responsible for supplying, installing, and maintaining your client workstations and the Ethernet local area network (LAN) that connects them with the printing system.
•Have test jobs ready to run.
Installation Planning Guide |
