Xerox 155, 100, 135, 115 Defining the printer to the host, Software licensing, Ongoing maintenance

Installation

•Have your operators available for training.

Refer to the installation planning checklist in the “Preparing for installation” chapter of this guide for a complete list of responsibilities.

Defining the printer to the host

Prior to installation of the printing system, your host system must be configured to communicate with the Xerox DocuPrint 100/ 115/135/155/180 EPS. This requires defining several parameters to your host. The required information and configuration procedures differ according to your connectivity type (channel or TCP/IP), and your host environment. You will need to provide these parameters to your Xerox representative on installation day.

Software licensing

When you purchase a Xerox DocuPrint 100/115/135/155/180 EPS, you receive a license to use the operating system software. This license is enabled by entering a 20-character alphanumeric string at the controller. Your Xerox or service representative obtains this license string for you and enters it when your printing system is installed.

Ongoing maintenance

After the installation of your printing system, there are a few ongoing tasks that must be performed. These tasks may include the following:

•Maintaining an adequate inventory of consumable supplies

•Overseeing routine maintenance and meter reporting

•Arranging for additional operator training

•Ordering additional fonts

•Ordering additional documentation

•Placing service calls for hardware problems

•Obtaining assistance in solving software-related problems

Installation Planning Guide 8-3