Press the Source button on the remote control or the projector cabinet to select “Video” (VCR, document camera, or laser disc player), S-Video”, “RGB” (computer or DVD with component output) or “PC Card Viewer” (slides on a CompactFlash card) to display the image.

Or press the “Menu” button on the remote control or the cabinet and use the menu to select your video source: “Video”, “S-Video”, “RGB” or “PC Card Viewer”.

NOTE: If no input signal is available, the projector will display a blue background (factory preset).

Adjust the Image Size and the Focus

Move the projector back and forth to fine adjust the image size on the screen

Use the Focus ring to obtain the best focus.

Place your projector on a flat level surface and Ensure that the projector is square to the screen.

Lift the front edge of the projector to center the image ver- tically.

Move the projector left to center the image horizontally on the screen.

Rotate the rear foot to make the image square to the screen.

Use keystone correction for proper adjustment.

E–28