Clock .......... Use this item to fine tune the computer image or to remove any
vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. Press the § and © buttons until the banding disappears.
This adjustment may be necessary when you connect your computer for the first time. This adjustment is made automatically when the Auto Adjust is turned on.
Phase ......... Use this item to adjust the clock phase or to reduce video noise,
dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use the § and © buttons to adjust the image.
Use "Phase" only after the "Clock" is complete.
This adjustment is made automatically when the Auto Adjust is turned on.
Resolution (when Auto Adjust is off)
This allows you to activate or deactivate the Advanced AccuBlend feature.
Auto ............ Turns on the Advanced AccuBlend feature. The projector auto-
matically reduces or enlarges the current image to fit the full screen. Native ......... Turns off the Advanced AccuBlend feature. The projector displays
the current image in its true resolution.
See "Auto Adjust (RGB Only) on page
NOTE: While you are displaying an image with higher resolution than the projector's native resolution, even when you are in the Native mode, the image is displayed full screen using the Advanced AccuBlend feature.
Factory Default
Changes all adjustments and setting to the factory preset for each source individually except Lamp Hour Meter, Projector Usage, Language and Communication Speed. (To reset the lamp usage time, see "Clear Lamp Hour Meter" on page
All Data ....... Reset all the adjustments and settings for all the signals to the
factory preset.
Current Signal . Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset for the currently projected image are: Picture (Brightness, Contrast, Color, Hue and Sharpness) and Image Options (Color Temperature, Gamma Correction, Advanced Options (Aspect Ratio, Noise Reduction, Color Matrix, White Balance, Posi- tion/Clock and Resolution).
NOTE: The Volume, Keystone and all the items in the Projector Options can be reset only when "All Data" is selected.
Projector OptionsMenu