Using Pointer

You can use one of eight pointers to draw your audience's attention to the portion of a projected image you want.

POINTER

Press the Pointer button to display the pointer.

Vol.

SELECT

Vol.

Use the Select button to move the pointer.

4. Return the image to the original size.

MAGNIFY

Correcting Keystone distortion (Optional presentation remote control)

Press (+) or (-) to correct keystone (trapezoidal) distortion to make the top or bottom of the screen longer or shorter so that the projected image is rectangular.

KEYSTONE

Enlarging and Moving a Picture

You can enlarge the area you want up to 400 percent. To do so:

1.Press the Pointer button to display the pointer.

POINTER

2. Move the pointer to the area you want to enlarge.

Vol.

SELECT

Vol.

3.Enlarge the selected area.

When the Magnify (+) button is pressed, the pointer is changed to a magnifying glass. To move the magnifying glass, use the Select button.

MAGNIFY

 

 

 

 

 

Keystone distortion

 

 

Normal

 

 

 

 

 

 

 

 

 

 

 

NOTE: The maximum keystone angle that can be corrected is 45 degrees upward and 15 degrees downward with the projector placed horizontally on the ground plane.

Depending on the type of graphics being used, the picture may get blurred or keystone correction may not be possible when excessive keystone correction is used.

The idea is, the closer you are to native resolution, the better image you will see.

Freezing a picture(Optional presentation remote control)

Press the Freeze button to freeze a picture. Press again to resume motion.

FREEZE

E–31