Top Features

1Power Button

Use this button to turn the power on and off when the Main Power Switch is on and the LCD projector is in standby. (When this button is pressed and held for at least two seconds, the “Display Mute” mode will be canceled.)

2Menu Button

Displays the on- screen menu.

3Select Button

After you press the “Menu” button, use this button to select the menu icon of the item you wish to adjust.

4Enter Button

Executes your menu selection.

5(+) (–) Adjust Button

Use these buttons while you' re in the Image Adjust mode to change the level of a selected menu item. These buttons are also used to set an item in the Power or Settings menus.

6(+) (–) Zoom Buttons

Press the (+) button to make the image larger; press (–) to make the image smaller.

FOCUS

7

ZOOM

6

ADJUST

5

ENTER

4

SELECT

3

MENU

2

 

1

PUSH POWER STATUS

9

ON/OFF

 

8

19

7 (+) (–) Focus Buttons

Press the (+) or (–) buttons to focus an image.

8Power Indicator

When this indicator is green, the LCD projector is on; when the indicator is amber, it is standing by.

9Status Indicator

When this is lit red continually, it's warning you that the projection lamp has exceed 2000 hours of service. After this light appears, it is advisable to replace the projection lamp as soon as possible.(See pages 61 and 62)

When the operating time of the lamp exceeds 2000 hours, the STATUS indicator is lit red continually. In addition the message "LAMP USAGE XX HOURS" appears continually when the on-screen menu is not displayed.

If this light blinks red rapidly, it indicates that either the lamp cover or filter cover is not attached properly; if the light blinks slowly it means the projector's internal temperature is too hot to operate safely. See the Status Light Messages on pages 69 and 70 for more details.

11

INTRODUCTION

20