NEC MT1000 Setting Up Your MultiSync MT1000 LCD Projector

2 I N S T A L L A T I O N

This section describes how to set up your MultiSync MT1000 LCD projector

and how to connect video and audio sources.

Carrying handle

Setting Up Your MultiSync MT1000 LCD Projector

Your MultiSync MT1000 LCD Projector is simple to set up and use. But before you get started, you must first:

1. Determine the image size

2. Set up a screen or select a non-glossy white wall onto which you can project your image.

Carrying The LCD Projector Always carry your LCD projector by the handle. Ensure that the power cord and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.

Push to release the handle.

Pull out

Push to retract

Selecting A Location The further your LCD projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 20" (0.5 m) measured diagonally when the projector is roughly 3 feet (1.0 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 40.03 feet (12.2 m) from the wall or screen.

Projection distance

	Width
Height	Screen size
	(diagonal)

29

Projection Distance and Image Size

	350									300”
(inch)	300
	250
Size
	200									235”
Image
					WIDE
	150
Diagonal	100
						TELE
	50
		27”
	0	20”
			6.56	13.12	19.69		26.25	32.81	40.03		ft.
	0.0
			(2.0)	(4.0)	(6.0)		(8.0)	(10.0)	(12.2) (m)

Projection Distance

16 INSTALLATION 30