Terminal Panel Features

This panel is located in the rear and is where you connect your cables.

1Remote Control Jacks

a. Remote Control Input Jack

Connect your remote control cable here for wired operation.

b. Remote Control Output Jack

This terminal enables you to operate up to five LCD projectors with the same remote control.

When your remote mouse receiver is connected here, the remote sensors on the LCD projector cabinet will receive your mouse commands.

2PC Control Port

Use this port to connect your PC to control the MultiSync MT1000 Projector. This enables you to use your PC and serial communica- tion protocol to control the projector. If you are writing your own program, command references are on pages 79 to 82.

312V DC/400 mA Output Terminal

Use this terminal to plug in a document camera or any other 12V accessory.

1 a

1 b

2

3

REMOTE CONTROL

PC

DC12V/400mA

CONTROL

OUTPUT

INPUT

OUTPUT

 

 

VIDEO INPUT AUDIO INPUT

 

 

L / MONO

R

 

 

4

 

 

 

S-VIDEO INPUT

 

AUDIO OUTPUT

5

 

 

 

L / MONO

R

 

 

RGB INPUT 1

AUDIO

 

 

 

 

RGB MONITOR OUTPUT

RGB INPUT 2

AUDIO

 

 

21

4Video Input

Connect a VCR, laser disc player, or document camera here to project video.

Left Channel/Mono Audio Input Jack

This is your left channel audio input for stereo sound coming from video equipment or audio system. This also serves as your monaural audio input.

Right Channel Audio Input Jack

This is your right channel audio input for stereo sound.

5S-Video Input

Here is where you connect S-Video input from an external source like a VCR.

Left Channel/Mono Audio Input Jack

This is your left channel audio input for stereo sound coming from S-Video equipment or audio system. This also serves as your monaural audio input.

Right Channel Audio Input Jack

This is your right channel audio input for stereo sound.

NOTE: S-Video provides more vivid color and higher resolution than the traditional composite video format.

12

INTRODUCTION

22