NEC MULTISYNC X462HB Terminal Panel, DVI in DVI-D, Rgb/Hv Out Bnc, Audio OUT, Remote IN/OUT

Terminal Panel

In

In

L

R

Out

Out

R, Cr/Pr	G, Y, VIDEO	B, Cb/Pb	H	V
(OUT)	(OUT)	(OUT)	(OUT) (OUT)

	L/R	L	L
Y Cb/Pb	(IN1)	(IN2) (IN3)

L (OUT)

R (OUT)

R, Cr/Pr	G, Y, VIDEO
(IN)	(IN)

B, Cb/Pb	H	V
(IN)	(IN)	(IN)

Cr/Pr

R R

(IN2) (IN3)

Main Power Switch

On/Off switch to turn main power ON/OFF.

AC IN connector

Connects with the supplied power cord.

DISPLAYPORT connector

To input DisplayPort signals.

HDMI connector

To input digital HDMI signals.

DVI IN (DVI-D)

To input digital RGB signals from a computer or HDTV device having a digital RGB output.

* This connector does not support analog input.

VGA IN (mini D-Sub 15 pin)

To input analog RGB signals from a personal computer or from other RGB equipment.

RGB/HV IN [R, G, B, H, V] (BNC)

To input analog RGB signals or signals from other RGB equipment.

This is also to connect equipment such as a DVD player, HDTV device and Set-Top-Box. A Sync-on-Green signal can be connected to the G connector.

This input can be used with an RGB, DVD/HD or Video source. Please select signal type in TERMINAL SETTING.

	R	G	B	H	V
RGB/HV	R	G	B	H	V
DVD/HD2	Pr	Y	Pb
VIDEO2		VIDEO

RGB/HV OUT (BNC)

To output the signal from the RGB/HV IN connector or VGA IN connector which is on screen to an input on a separate device. If both signals are not on screen, outputs the signal from RGB/HV IN connector.

VIDEO IN connector (BNC and RCA)

To input a composite video signal. BNC and RCA connectors are not available at the same time (Use only one input).

VIDEO OUT connector (BNC)

To output the composite video signal from the VIDEO IN connector.

DVD/HD connector (RCA)

Connecting equipment such as a DVD player, HDTV device, or Set-Top-Box.

S-VIDEO IN connector (Mini DIN 4 pin)

To input the S-video (Y/C separate signal).

AUDIO IN 1, 2, 3

To input audio signal from external equipment such as a computer, VCR or DVD player.

AUDIO OUT

To output the audio signal from the AUDIO IN 1, 2, 3, DPORT, HDMI, and TV jack to an external device (stereo receiver, amplifier, etc.).

EXTERNAL CONTROL (D-Sub 9 pin)

IN connector: Connect RS-232C input from external equipment such as a PC in order to control RS-232C functions.

OUT connector: Connect RS-232C output. To connect multiple MultiSync monitors via RS-232C daisy Chain.

LAN port (RJ-45)

LAN connection. See page 31.

REMOTE IN/OUT

Use the optional wired remote control by connecting it to your monitor.

NOTE: When you use Remote IN/OUT, IR CONTROL in OSD menu should be NORMAL.

English-8