INFORMATION OSD | Selects whether the information OSD is displayed or not. The information OSD will be | ON, 3 Sec. | |
|
| displayed when the input signal or source changes. The information OSD will also give a |
|
|
| warning when there is |
|
|
| An interval between 3 to 10 seconds for the Information OSD to appear is available. |
|
|
|
|
|
MONITOR INFORMATION | Monitor Information. | - | |
|
| CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon |
|
|
| footprint factor in the carbon saving calculation is based on the OECD (2008 Edition). |
|
|
|
|
|
OSD TRANSPARENCY | Set the transparency level of the OSD. | TYPE2 | |
|
|
|
|
| OFF |
|
|
|
|
|
|
| TYPE1 |
|
|
|
|
|
|
| TYPE2 |
|
|
|
|
|
|
OSD ROTATION | Determines the OSD display direction between landscape and portrait. | LANDSCAPE | |
|
|
|
|
| LANDSCAPE | Display the OSD with landscape mode. |
|
|
|
|
|
| PORTRAIT | Display the OSD with portrait mode. |
|
|
|
|
|
INPUT NAME | You can create a name for the INPUT currently being used. | - | |
|
| Max: 8 characters, including Space, |
|
|
|
|
|
CLOSED CAPTION | Activates closed captioning. | OFF | |
VIDEO1, VIDEO2, |
|
| |
|
|
|
|
OSD RESET | Resets the following settings within the OSD menu back to factory setting: | - | |
|
| OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY, |
|
|
| CLOSED CAPTION. |
|
|
|
| |
MULTI DISPLAY |
|
| |
MONITOR ID | Sets the monitor ID number from | 1 | |
|
| NOTE: Group ID is made of multiple selections. |
|
|
|
|
|
IR CONTROL | Selects the mode of the monitor for use with the | NORMAL | |
|
|
| |
|
|
|
|
| NORMAL | The monitor will be controlled normally using the remote controller. |
|
|
|
|
|
| PRIMARY | Choose “PRIMARY” for the first monitor within an |
|
|
|
|
|
| SECONDARY | Choose “SECONDARY” for all subsequent monitors within an |
|
|
|
|
|
| LOCK | Prevents the monitor from being controlled by the wireless remote controller. To return to |
|
|
| normal operation, press the “DISPLAY” button on the remote controller for 5 seconds. |
|
|
|
|
|
TILE MATRIX | Allows one image to be expanded and displayed over multiple screens (up to 100) through a |
| |
|
| distribution amplifier. |
|
|
| NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operate |
|
|
| without a distribution amplifier at a lower number of screens. |
|
|
|
|
|
| H MONITORS | Number of monitors arranged horizontally. | 1 |
|
|
|
|
| V MONITORS | Number of monitors arranged vertically. | 1 |
|
|
|
|
| POSITION | Select which section of the tiled image to be displayed on the monitor. | 1 |
|
|
|
|
| TILE COMP | Turns the TILE COMP feature on. | NO |
|
|
|
|
| ENABLE | Enables Tile Matrix. | NO |
|
|
|
|
POWER ON DELAY | Adjusts the delay time between being in “standby” mode and entering “power on” mode. | 0 Sec. | |
|
| “POWER ON DELAY” can be set between 0 and 50 seconds. |
|
|
|
|
|
POWER INDICATOR | Turns ON or OFF the LED located at the front of the monitor. | ON | |
|
| If “OFF” is selected, LED will not light when the LCD monitor is in active mode. |
|
|
|
|
|
EXTERNAL CONTROL |
|
| |
|
|
|
|
| CONTROL | Selects the control interface, | |
|
|
|
|
| LAN RESET | Resets the LAN settings. | - |
|
|
|
|
| ID=ALL REPLY | When controlling the monitor externally, select if the communication command, which specifies | ON |
|
| destination equipment ID (ALL or GROUP ID), is replying or not. Use this function as necessary, |
|
|
| if you connect the multiple monitors that are |
|
|
|
|
|
| MAC ADDRESS | Displays the MAC ADDRESS. | - |
|
|
|
|
English
