10

Connecting to the Aerial

Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.

RF coaxial connection

Connect the RF. OUTjack on the recorder to the
aerial input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUTjack passes the
signal through from the AERIALjack.
ANTENNA
INPUT
Aerial
Rear of the recorder
Rear of TV
L
R
AUDIO INPUT VIDEO
INPUT
R
aAERIAL
Connect the aerial to this terminal.
bAV OUT (VIDEO / AUDIO OUT (Left/Right))
Connect to a TV with video/audio inputs.
cAV IN 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
dCOAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
eOPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
fCooling fan
gAC Power Cord
Plug into the power source.
hRF. OUT
Passes the signal from the AERIALto your
TV/monitor
iS-VIDEO OUT
Connect to a S-Video Input on TV.
jCOMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.

Rear Panel

Hookup and Settings
abcdef g
hi j