Before Operation (Continued)
Sampling Frequency
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is made, this unit will pass each type of signal through without any further processing.
Dolby Digital
DTS
MPEG
Sampling Freq. | 48KHz |
DRC96KHz
Vocal
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to ON for this effect.
Setup | Dolby Digital |
|
|
| |
Language | DTS |
|
MPEG |
| |
|
| |
Audio | Sampling Freq. |
|
| DRC | OFF |
Lock | Vocal | ON |
Recording
Disc
Vocal
Set Vocal to ON only when a
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
VocalOFF
ON
LOCK (Parental Control)
Set Password
To access the Movie Rating, Set Password and Country |
|
Code features, you must enter a | HOOKUP |
2 Use v / V to select the LOCK option. | |
word. |
|
1 Press SETUP.
The Setup menu appears.
3 While the LOCK option is selected, press B to move to the second level.
4Use v / V to select the Set Password option.
5Press B to move to the third level.
6Enter a 4-digit password using the numbered but-
tons to create a personal
Movie Rating |
|
|
|
|
|
|
|
|
|
|
Set Password | Change New |
|
|
| ||||||
Country Code | Delete | Password |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When you have already entered a password;
You can change or delete the password.
Use v / V to select “Change” or “Delete” then press
ENTER.
Change : Enter a
Delete : Enter a
ip
If you make a mistake, press b repeatedly to delete password numbers one by one then correct it.
If you forget your 4-digit code
If you forget your password, to clear the current pass- word, follow the procedure below.
1.Press SETUP to display the Setup menu.
2.Use the Number buttons to enter the
3.Select “Yes” then press ENTER. The
23