OVERVIEW
DSS/BLF
3.Multiple Dterms cannot use one DSS console.
4.Circuit cards for the DSS are as follows:
•PA-16ELCJ
•PA-DAIG-A (DAI)
•PA-DAIJ-A (DAI)
The previous conditions also apply when a Distributed Access Unit (DAU) is used between the PBX and the DSS.
6.DSS/BLF
One DSS/BLF console requires 2 consecutive ports on an ELC/DAI card.
When a DSS console is used as a DSS/BLF, be sure to assign and wire the DSS/BLF to a specific LEN whose level (LV) is an even number (LV = 0, 2, 4, 6). Since a DSS/BLF requires 2 consecutive ports to program the DSS keys, the port following the designated port, to which the DSS/BLF is wired, must be reserved.
Table
LEVEL NUMBER | CONDITIONS |
|
|
2n | A DSS console can be connected. |
|
|
2n + 1 | Must be reserved for the DSS console. |
|
|
Note: In Table
Page 7
Revision 1.0
