CHAPTER 1 INTRODUCTION
1.PURPOSE
This manual is used for programming office data and designing the system layout required for customizing the NEAX2000 IVS (PBX).
Before engaging in installation work, the installer is required to fill in the office data sheet, and draw the system layout and floor layout in this manual according to customer’s requirements. For additional information, refer to the Command Manual and Installation Procedure Manual.
2.OUTLINE OF MANUAL
This manual consists of three chapters. The contents of Chapters 2 and 3 are outlined below.
•CHAPTER 2 (CUSTOMIZING DATA):
This chapter explains the various tables for customer specifications such as numbering plan, station data and trunk data, etc., and sheets for designing the system layout such as Bay Face Layout.
•CHAPTER 3 (DATA PROGRAMMING SHEETS):
This chapter explains the office data programming sheets provided on a command basis.
NOTICE
In the USA, the Dterm represents Multiline Terminal.
In the USA, My Line represents Primary Extension.
Page 1
Revision 2.0
