4-6 Field Service Guidelines
3. To replace the diskette drive, remove the four flat screws attaching it to the null
diskette assembly , two attaching the diskette cover and remove the diskette drive
cable.
4. To replace the diskette drive unit, remove the four small screws attaching it to the
null diskette drive assembly and remove the diskette drive cable.
5. To replace the diskette drive module, reverse the above pro cedure.
Figure 4-2 Diskette Drive Module Assembly
Removing/Replacing the LCD Status Bar Cover and Hinges
Remove the LCD Status Bar Cover and Hinge Covers are as follows:
1. Turn off the computer. Follow all disassembly procedures mentioned from the
start of this section.
2. Slide the left and right hinge covers out to remove them.
3. Lift the status bar cover out.
4. To replace the LCD Status Cover and Hinge Covers, reverse the removal proce-
dures mentioned above.
SOLD BY laptopia2005 DO NOT RESELL!!
SOLD BY laptopia2005 DO NOT RESELL!!