3. Projecting an Image (Basic Operation)

7Turning off the Projector

To turn off the projector:

1.First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote con- trol.

The [POWER OFF / ARE YOU SURE? /CARBON SAV- INGS- SESSION 0.000[g-CO2]] message will appear.

2.Secondly, press the ENTER button or press the (POWER) or the POWER OFF button again.

The lamp will turn off and the projector will go into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green when [NORMAL] is selected for [STANDBY MODE].

Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 seconds.

3.Finally, unplug the power cable. The POWER indicator will go out.

NOTE: Do not unplug the power cable within 10 seconds of making adjustment or setting changes and closing the menu.

Doing so can cause loss of adjustments and settings.

Power On

Standby

Steady green light

Steady orange light

CAUTION:

Parts of the projector will become heated during operation. Use caution when picking up the projector immediately after it has been operating.

CAUTION:

The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green. Doing so could cause premature lamp failure.

26