4. Convenient Features
Changing Eco Mode
This feature enables you to select two brightness modes of the lamp:
OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].
[ECO MODE] | Description | Status of LAMP indicator |
|
[OFF] | This is the default setting (100% Brightness). | Off | LAMP |
|
|
| STATUS |
[ON] | Select this mode to increase the lamp life (approx. | Steady Green light | LAMP |
| 90% Brightness.) |
| |
|
| STATUS | |
|
|
|
To turn on the [ECO MODE], do the following:
1.Press the ECO MODE button on the remote control to display [ECO MODE] screen.
2.Use the or button to select [ON].
3.Press the ENTER button.
To change from [ON] to [OFF], Go back to Step 2 and select [OFF]. Repeat Step 3.
NOTE:
•The [ECO MODE] can be changed by using the menu. Select [SETUP] → [GENERAL] → [ECO MODE].
•The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME].
•The projector is always in [OFF] for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green. The lamp condition will not be affected even when [ECO MODE] is changed.
•After a lapse of 45 seconds from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switch to [ON]. This is done only when [ECO MODE] is set to [OFF].
•If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [ON] mode to protect the projector. When the projector is in [ON] mode, the picture brightness decreases. When the projector comes back to normal temperature, the [ECO MODE] returns to [OFF] mode.
Thermometer symbol [ 
] indicates the [ECO MODE] is automatically set to [ON] mode because the internal temperature is too high.
＋
ID SET | 0 | CLEAR |
MENU 
EXIT
|
| ENTER |
|
|
M |
|
|
| E |
N |
|
|
| |
A |
|
|
|
|
G |
|
| G | |
I |
| |||
F | A |
| ||
| Y | P |
|
|
MOUSE
ECO MODEKEYSTONEPICTURE
HELP FOCUS ASPECT VOL.
ZOOM
29