4. Convenient Features

Network Settings

http://<the projector’s IP address> /index.html

DHCP����������������������������������Enabling this option automatically assigns an IP address to the projector from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator.

TIP: You can check the IP address in the menu when [ENABLE] is selected for [DHCP].

To do so, from the menu, select [INFO.] [WIRED LAN] when [CONTROL TERMINAL] is set to [LAN].

IP ADDRESS�����������������������Set your IP address of the network connected to the projector when [DISABLE] is selected for [DHCP].

TIP: You can check your specified IP address in the menu

To do so, from the menu, select [INFO.] [WIRED LAN] .

SUBNET MASK �������������������Set your subnet mask number of the network connected to the projector when [DISABLE] is selected for [DHCP].

DEFAULT GATEWAY����������������Set your default gateway of the network connected to the projector when [DISABLE] is selected for [DHCP].

DNS (PRIMARY)�����������������Set your primary DNS settings of the network connected to the projector. DNS (SECONDARY) �����������������Set your secondary DNS settings of the network connected to the projector.

UPDATE ������������������������������Reflect your settings.

NOTE: Close the browser after clicking [UPDATE]. The projector will automatically update your settings.

TIP: Selecting [NETWORK SETTINGS] for [RESET] from the projector’s menu allows you to return the following items to the factory default.

[DHCP]: DISABLE

[IP ADDRESS]: 192.168.0.10

[SUBNET MASK]: 255.255.255.0

[DEFAULT GATEWAY]: 192.168.0.1

* [DNS(PRIMARY)] and [DNS(SECONDARY)] will remain unchanged.

37