5. Using On-Screen Display

 

 

 

 

 

 

 

ITEM

 

 

DESCRIPTION

 

 

 

 

 

 

 

 

Color System

 

 

Select the default Color System to use for Video or S-Video input.

 

 

 

 

Range: Auto, NTSC, PAL, SECAM

 

 

 

 

 

 

 

 

 

 

 

 

 

Filter Message

 

 

Set this item to on to have the projector display a message when the air

 

 

 

 

filter needs servicing.

 

 

 

 

 

Range: Off, 100[H], 200[H], 500[H], 1000[H]

 

 

 

 

 

 

 

Auto Start

Auto Start enables the projector to start automatically when the power cable is connected to an active power outlet and the main power switch is on. This eliminates the need to always use the POWER (ON/STANDBY) button on the remote control or projector cabinet. To use the Auto Start function, you must first press the main power switch to On before connecting the power cable.

Note:

yWhen the projector is off by using the POWER button (or put in the standby mode) and the power cable is disconnected, Auto Start will not activate after power (AC) is applied.

yWhen the projector is off by using the Direct Power Off function or after the power (AC) is removed (no standby mode), Auto Start will be activated after power (AC) is applied.

yThe Direct Power Off function means you can turn off the power (AC) to the projector by using a power strip equipped with a switch and a breaker.

Power Management

Power Management enables the projector to automatically turn off if there is no signal received by any input.

86