26
3. Projecting an Image (Basic Operation)
Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.

1 Turning on the Projector

NOTE:
• Theprojectorhastwopower switches:amainpowerswitch anda (POWER)button(POWERONandOFFon theremote
control).
• Whenplugginginorunpluggingthesuppliedpowercable,makesurethatthemainpowerswitchispushedtotheoff() posi-
tion.Failuretodosomaycausedamagetotheprojector.
1. Remove the lens cap
• Donotremovethelenscapbypullingonthestring.Doing
so can cause mechanical damage to the part around the
lens.
2. To turn on the main power to the projector, press the
Main Power switch to the on position ( I ).
The projector will go into standby mode. When in standby
mode, the POWER indicator will light orange and the STA-
TUS indicator will light green when [NORMAL] is selected
for [STANDBY MODE].
See the Power Indicator section.(→ page 87)
FOCUS
FOCUS
STATUS
LAMP
AUTO ADJ. SOURCE