27
3. Projecting an Image (Basic Operation)
3. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control for 1
second.
The POWER indicator will turn to green and the projector
will become ready to use.
NOTE: When the projector is turned on, it may take some time
before the lamp light becomes bright.
TIP:
• WhentheSTATUSindicator lightsorange,itmeans thatthe
[CONTROLPANELLOCK]isturnedon.(→ page 72)
• Whenthemessage“Projectorislocked!Enteryourpassword.”
isdisplayed,itmeansthat the[SECURITY]isturnedon. (→
page 43)
After you turn on your projector, ensure that the computer
or video source is tur ned on and that your lens cap is
removed.
NOTE:Whennosignalisavailable,theNEC logo,blue(default),or
black screen will be displayed. When the projector displays the NEC
logo, a blue or black screen, the projector will automatically switch
to[ECOMODE].
TheprojectorwillreturnECOMODEtoitsprevioussettingoncean
active signal is connected.
STATUS
LAMP
AUTO ADJ.SOURCE
MENU
UP
MAGNIFY PAGE
OFF
POWER
ON
AV-MUTE
DOWN
STATUS
LAMP
AUTO ADJ.SOURCE
Standby Blinking PowerOn
Steady orange light
Blinking green
light
Steady green
light
(→ page 87)