NEC OP-220-73003 manual Tools, Removing a Hard Disk Drive, Opening the panel, NEC Versa

NEC Versa® VXi

Hard Disk Drive

Congratulations on purchasing an NEC Versa VXi hard disk drive. Your new drive lets you take advantage of the latest in high-capacity storage and superior drive organization while using a compact notebook computer.

The NEC Versa VXi hard disk drive comes in the following models:

!6-GB hard disk drive — Option Kit OP-220-73001

!10-GB hard disk drive — Option Kit OP-220-73002

!12-GB hard disk drive — Option Kit OP-220-73003

!20-GB hard disk drive — Option Kit OP-220-73005

In addition to describing the features of the NEC Versa VXi hard disk drive, this document describes how to remove and install a hard drive in the NEC Versa VXi computer.

Tools

You will need a small Phillips-head screwdriver to remove an existing drive and install your NEC Versa VXi hard disk drive.

Removing a Hard Disk Drive

Before you install your new NEC Versa VXi hard disk drive, you must remove the existing hard drive from your computer. Follow these steps to remove the existing hard disk drive.

1.Power off your computer. If the system is connected to an AC power source, disconnect it.

2.Locate the drive access panel on the left side of the system. Open the panel using the notch.

Opening the panel

A – Drive Access Panel B – Notch

NEC Versa VXi Hard Disk Drive 1