4.Release the inverter board by remove the screw and disconnect all connectors as shown in Fig. 29

M2x3 Copper

Fig. 29 Removing the Inverter Board

5.Carefully lift up the LCD panel.

6.Remove the screws at both sides of the LCD panel in order to release the LCD hinges as shown in Fig. 30

M2x3 Copper

Fig. 30 Removing the LCD Panel hinges

Note: Beware when assembly LCD Bezel. You need to follow below instruction to ensure it properly close at both left and right side of the Bezel.

1.Push on top of Bezel.

2.Push at the side of LCD cover inward to close the gap

NEC VERSA M350/P550 Disassembly Manual

Page 20