NEC m350, P550 Removing the MDC Modem, Removing the Bluetooth Module

Removing the MDC Modem

To remove the MDC Modem, first remove the top cover (see Removing the Top Cover), then perform the following steps:

1. Disconnect cable and release screws on MCD Modem as shown in Fig. 34

M2.5 x 7 Sliver

Fig. 34 MDC Modem

2. Lift up the MDC modem and put it aside.

Removing the Bluetooth Module

To remove the Bluetooth Module, first remove the top cover (see Removing the Top Cover), then perform the following steps:

1. Disconnect cable on main board as shown in Fig. 35

Fig. 35 Bluetooth Module

2. Carefully separate it from bottom cover and put it aside.

NEC VERSA M350/P550 Disassembly Manual Page 24