NEC m350, P550 Removing the Top Cover

Removing the Top Cover

To remove the Top Cover , first remove the battery (see Removing the Battery), remove the HDD (see Removing the Hard Disk Drive), remove the Optical Disk Drive (see Removing the Optical Disk Drive), remove the Keyboard (see Removing the Keyboard) and remove the LCD Module (see Removing the LCD Module) then perform the following steps:

1. Remove all screws on the bottom of the base unit as shown in Fig. 31

A=M2x4 Sliver

B=M2.5x9

Copper

Fig. 31 Bottom Cover

NEC VERSA M350/P550 Disassembly Manual Page 21