Convenient Picture Control, Edit | NEC PF32W503 instruction

EDIT

1. Press the menu button to select

INSTALL.

2. Press the C/B buttons and then

INSTALL SYSTEM.

3. Select EDIT with the PR y/x buttons and press the C/B buttons to start EDIT.

4. DELETE PROGRAM POSITION DATA.

Position the blue-line to the program to delete with the PR y/x buttons and the DELETE button.

5.CHANGING THE ORDER OF THE CHANNELS

Position the blue-line to a program to move with the PR y/x buttons and the move button.

Press the PR y/x buttons to position the blue-line to another program to exchange.

By pressing the MOVE button again, selected two program will be exchanged.

6.ENTER A STATION NAME

Locate the cursor to below NAME with the C/B buttons.

Using the PR y/x buttons, select the desired letter, number or blank.

Press the B(right button) to select the next position.

7.SELECT THE PICTURE SYSTEM

Position the blue-line to the PICTURE to select with the C/B buttons and change the picture (ex. PAL, SECAM, NTSC, ..) with the PR y/x buttons or you can select the PICTURE mode with the SYSTEM button on the remote controller.

8.SELECT THE SOUND SYSTEM

Position the blue-line to the SOUND to select with the C/B buttons and change the SOUND (ex. BG, DK, I, M, ..) with the PR y/x buttons.

9.SKIPPING THE CHANNELS

You can select SKIP with the SKIP button in EDIT mode or

locate in the cursor to below SKIP with the C/B buttons and then press the PR y/x buttons to skip the desired program.

A program marked with skip “V” is skipped when changing

channel using the program UP/DOWN(on normal operation). Press the NUMBER buttons 0~9 or the PR y/x buttons to select program number you want. The screen will change according to the selected program number.