Operating
Environmental
Considerations
Temperature 5° C to + 30° C
Humidity 30% to 80%
Storage
Environmental
Considerations
Temperature -10° C to + 60° C
Humidity 10% to 85%
* Interpolated Resolutions: when resolutions are shown that are lower than the pixel
count of the LCD module, text my appear chappy or lines may appear to be bold. This is
normal and necessary for all current flat panel technologies, each dot on the screen is
actually one pixel, so to expand resolutions to full screen, an interpolation of the
resolution must be done. When the interpolated resolutions is not an exact multiple of
the native resolution, the mathematical interpolation necessary may cause some lines to
appear thicker than others.
** NEC cites recommend resolutions at 60 Hz for optimal display performance.
*** Active display area is dependent upon the signal timing.

Technical specifications are subject to change without notice.

Troubleshooting/Support
Problem Check These Items
No pictures - The signal cable should be completely connected to
the display card/computer.
- The display card should be completely seated in its
slot.
- Power Switch and computer power switch should be
in the ON position.
- Check to make sure that a supported mode has been
selected on the display card or system being used.
(Please consult display card or system manual to
change graphics mode.)
- Check the monitor and your display card with respect
to compatibility and recommended settings.
- Check the signal cable connector for bent or
pushed-in pins.
Troubleshooting/Support E - 15