Problem Check These Items
Image is unstable,
unfocused or
swimming is
apparent
- Signal cable should be completely attached to the
computer.
- Use the OSM Image Adjust controls to focus and
adjust display by increasing or decreasing the fine
total. When the display mode will be changed, the
OSM Image Adjust settings may need to be
re-adjusted.
- Check the monitor and your display card with respect
to compatibility and recommended signal timings.
LED on the monitor
is not lit (no green or
amber colour can be
seen)
Power Switch should be in the ON position and the
power cord should be connected.
Display image has a
green cast to it Open OSM Display Mode and press the + Control
button.
Display image is not
centered Use OSM Position adjustment controls to adjust
centering.
Display image is not
sized properly - Use the OSM Image Adjust controls to increase or
decrease the Coarse total.
- Check to make sure that a supported mode has been
selected on the display card or system being used.
(Please consult display card or system manual to
change graphics mode.)
Selected resolution
is not displayed
properly
Use OSM Display Mode to enter Mode Change sub
menu and confirm that the appropriate resolution has
been selected. If not, select corresponding option.
E - 16 Troubleshooting/Support