OSM Location
You can choose where you would like the OSM control image to appear
on your screen. Selecting OSM Location allows you to manually adjust
the position of the OSM control menu left, right, up or down.
OSM Turn Off Time
The OSM control menu will stay on as long as it is in use. In the OSM
Turn Off Time submenu, you can select how long the monitor waits
after the last touch of a button to shut off the OSM control menu. The
preset choices are 10, 20, 30, 60 and 120 seconds.
OSM Lock Out
This control completely locks out access to all OSM control functions.
When attempting to activate OSM controls while in the lock out mode, a
screen will appear indicating the OSM controls are locked out. To
activate the OSM Lock Out function, press PROCEED, then ▲ and
hold down simultaneously. To de-activate the OSM Lock Out, press
PROCEED, then ▲ and hold down simultaneously.
Display Mode
Display Mode provides information about the current resolution display
and technical data including the preset timing being used and the
horizontal and vertical frequencies.
NOTE: Display Mode should only be used if a resolution is not recognized
by the monitor. The user can change to the appropriate resolution by entering
the Display Mode sub-menu and selecting the corresponding option.
Language Select
OSM control menus are available in six languages.
Factory Preset
Selecting Factory Preset allows you to reset all OSM control settings
back to the factory settings. The RESET button will need to be held
down for several seconds to take effect, individual settings can be reset
by highlighting the control to be reset and pressing the RESET button.
Controls E - 11