Setting the picture size for RGB input signals
Use this procedure to switch the setting to “ON” or “OFF”. * This function is available only for 50 and 60 inch types.
Example: Setting the “PICTURE SIZE” mode to “OFF”
On “PICTURE SIZE” of “OPTION2” menu, select “OFF”.
| OPTION 2 | 2 / 4 | |
PREVIOUS PAGE |
|
| |
PWR. MGT. |
| : | OFF |
CINEMA MODE | : | ON | |
LONG LIFE |
|
|
|
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | OFF |
PICTURE SIZE | : | OFF | |
DVI SET UP |
|
|
|
PROTOCOL SET | : | OFF | |
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
Setting the signal and black level for DVI signal
Choose the signal for the DVI connector (PC or STB/ DVD) and set the black level.
Example: Setting the “PLUG/PLAY” mode to “STB/ DVD”
On “OPTION2” menu, select “DVI SET UP”, then press the MENU/ENTER button.
The “DVI SET UP” screen appears.
On “PLUG/PLAY” of “DVI SET UP” menu, select “STB/ DVD”.
DVI SET UP
PLUG/PLAY |
| : | STB/DVD |
BLACK LEVEL | : | HIGH | |
SEL. | ADJ. |
| EXIT RETURN |
Information
PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to “LOW” automatically. STB/DVD: When connected to the SET TOP BOX, DVD etc.
BLACK LEVEL is set to “HIGH” automatically.
BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD etc. Change “HIGH” into “LOW” if the black level appears gray.
Setting the Protocol set
Use this setting when connecting a device which uses special protocol for
Example: Setting “ON”
On “PROTOCOL SET” of “OPTION2” menu, select “ON”.
| OPTION 2 | 2 / 4 | |
PREVIOUS PAGE |
|
| |
PWR. MGT. |
| : | OFF |
CINEMA MODE | : | ON | |
LONG LIFE |
|
|
|
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | OFF |
PICTURE SIZE | : | ON | |
DVI SET UP |
|
|
|
PROTOCOL SET | : | ON | |
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
Option3 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Using the timer
This function sets the day of the week and time. You can also set the program timer which turns on or off the power at the day of the week, time and the input mode you want, or repeat timer which displays two input modes alternately. On “OPTION3” menu, select “TIMER”, then press the MENU/ENTER button.
The “TIMER” screen appears.
| TIMER |
|
PRESENT TIME |
| |
TIMER | : | OFF |
|
|
|
SEL. | MENU/ENTER OK | EXIT RETURN |
PRESENT TIME
This sets the day of the week and present time.
Example: Setting “WEDNESDAY”, “22:05”
On “TIMER” menu, select “PRESENT TIME”, then press the MENU/ENTER button.
The “PRESENT TIME” screen appears. Adjust the items.
PRESENT TIME
RETURN |
|
|
SUMMER TIME | : OFF | |
| WEDNESDAY | |
| 22 : 05 : 00 | |
SET |
|
|
SEL. | ADJ. | EXIT RETURN |
Select “SET”, then press the MENU/ENTER button.
The adjustments are stored and the TIMER menu reappears.
*If you press the EXIT button instead of the MENU/ENTER button, the settings can not be made.
PRESENT TIME
RETURN |
|
SUMMER TIME | : OFF |
WEDNESDAY
22 : 05 : 00
SET
SEL. | MENU/ENTER OK | EXIT RETURN |
Information
PRESENT TIME settings
SUMMER TIME: Use to set SUMMER TIME.
ON: The present time + 1 hour.
OFF: Cancelled
Day: Set the day of the week (e.g. Sunday).
Hour: Set the hour in the
Minutes: Set the minutes (range 00 to 59).
Information
PROTOCOL SET settings
ON: When special protocol is used.
OFF: When NEC protocol is used (normal). * Consult your dealer for details of protocol.