Side-by-Side

RGB1

SELECT/ FREEZE button

S BY S1

RGB1RGB1

or

S BY S2

RGB1RGB1

Picture-in-Picture

RGB1

SELECT/ FREEZE button

RGB1RGB1

Displaying the information as a text

Example: Setting “TEXT INSERT” to “BOTTOM-3”, “INPUT” to “RGB1”, “SUB. P DETECT” to “AUTO”,

“PIC. RATE” to “100%” and “DISPLAY” to “NORMAL”

On “TEXT INSERT” of “OPTION4” menu, select “BOTTOM-3”, then press the MENU/ENTER button. The “TEXT INSERT” screen appears.

Adjust the items.

TEXT INSERT

INPUT

 

:

RGB1

SUB. P DETECT

:

AUTO

PIC. RATE

 

:

100%

DISPLAY

 

:

NORMAL

SEL.

ADJ.

 

EXIT RETURN

Enhanced split screen Model

Information

￿TEXT INSERT setting

OFF: Displays no text. BOTTOM-1/BOTTOM-2/BOTTOM-3/MID.LOW/MID.HIGH/TOP-3/TOP-2/TOP-1/LEFT/RIGHT:

Switching the input source quickly

This feature enables quick input selection.

After setting ON, press the CLEAR/SEAMLESS SW button for quick switching between the two selected input signals.

Example: Set to switch quickly between RGB1 and RGB2.

On “SEAMLESS SW” of “OPTION4” menu, select “ON”. Select “RGB1” and “RGB2”.

 

OPTION 4

4 / 4

PREVIOUS PAGE

 

 

SUB. PICTURE

 

 

ZOOM NAV

 

:

BTM LFT

PIC FREEZE

:

S BY S1

SEAMLESS SW

:

ON

SELECT1

 

:

RGB1

SELECT2

 

:

RGB2

TEXT INSERT

:

OFF

SEL.

ADJ.

 

EXIT RETURN

* The available sources depend on the settings of input.

Information

￿SEAMLESS SW Function

*This feature will not function for certain input combinations. See the table on page En-16.

*After switching to the selected input, please operate this function.

*This feature will not function during split screen mode.

*When SEAMLESS SW is first turned on, or when signals being transmitted are changed, there may be a slight delay due to signal analysis.

￿SEAMLESS SW settings

OFF: Turns off the SEAMLESS SW function.

ON: When the CLEAR/SEAMLESS SW button is pressed, input signals will switch quickly according to the setting of SELECT1 and SELECT2.

Displays a text at the specified location, where the subscriptions -1, -2 and -3 indicate the height of the text area.

￿INPUT setting

Sets the input of the text to the RGB1 to 3.

￿SUB. P DETECT setting

AUTO: Black frame with no signal input disappears 3 seconds after the input signal is lost.

OFF: Black frame with no signal input is displayed consistently.

￿PIC. RATE setting

Sets the transparency of the text.

￿DISPLAY setting

NORMAL: The sub screen is displayed consistently.

FADE: The sub screen fades in.

En-36