CONFIDENTIAL

DISP. MODE

Select the screen mode from between two options (Splitting, Blanking).

Example: Setting “BLANK”

On “ DISP. MODE” of “ VIDEO WALL” menu, select “ BLANK” .

 

 

 

 

VIDEO WALL

 

 

DIVIDER

:

1

 

POSITION

 

 

 

 

DISP. MODE

 

:

BLANK

 

 

 

 

 

 

AUTO ID

:

OFF

IMAGE ADJUST

 

 

 

P. ON DELAY

:

OFF

PLE LINK

:

OFF

REPEAT TIMER

:

OFF

 

 

SEL.

ADJ.

EXIT

RETURN

Information

DISP. MODE settings

SPLIT: Combines enlarged screens and creates multiple screens.

BLANK: Corrects misalignment of combined screen portions and creates multiple screens

AUTO ID

This feature automatically sets the ID numbers of multiple displays connected to each other.

Example: Setting “ON”

Set the ID number for the No. 1 display on ID NUMBER menu.

On “ AUTO ID” of “ VIDEO WALL” menu, select “ ON” , then press the MENU/ENTER button.

 

 

AUTO ID

 

 

AUTO ID

:

ON

 

1

2

1

2

3

4

3

8

9

4

 

 

7

6

5

WIRED CABLE

CONNECTION TURN

ADJ.

EXIT

RETURN

Information

AUTO ID settings

ON: Enables Auto ID function. In the case shown below, display 1 will be set as ID 1, display 2 as ID2, etc. This can be set only when a 22 or 33 video wall is selected.

IMAGE ADJUST

The position of the image can be adjusted and flickering of the image can be corrected.

Example: Adjusting the vertical position

On “ VIDEO WALL” menu, select “ IMAGE ADJUST” , then press the MENU/ENTER button.

The “ IMAGE ADJUST” screen appears.

On “ V-POSITION” of “ IMAGE ADJUST” menu, adjust the position.

 

 

IMAGE ADJUST

 

 

 

 

ASPECT MODE

 

:

NORMAL

 

 

 

 

 

V-POSITION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H-POSITION

 

 

 

 

 

 

 

 

 

 

V-HEIGHT

 

 

 

 

 

 

 

 

 

 

H-WIDTH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO PICTURE

 

:

OFF

 

 

 

 

FINE PICTURE

 

 

 

 

 

 

 

 

 

 

PICTURE ADJ.

 

 

 

 

 

 

 

V-POSITION

 

+64

 

SEL.

ADJ.

 

EXIT

RETURN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

IMAGE ADJUST settings

These are the same functions as the IMAGE ADJUST menu on page E-20.

P. ON DELAY (Power on delay)

Use this function to activate power-on delay.

Turn on the AUTO ID before the following operations. Example: Setting “ON”

On “ P. ON DELAY” of “ VIDEO WALL” menu, select “ ON” .

 

 

 

 

VIDEO WALL

 

 

DIVIDER

:

1

 

POSITION

 

 

 

DISP. MODE

:

SPLIT

AUTO ID

:

OFF

IMAGE ADJUST

 

 

 

 

P. ON DELAY

 

:

ON

 

 

 

 

 

 

PLE LINK

:

OFF

REPEAT TIMER

:

OFF

 

 

SEL.

ADJ.

EXIT

RETURN

Information

P. ON DELAY settings

ON: Turns on the main power of each display after a delay time.

OFF: Turns on the main power of all displays at the same time.

(Only for 16 and 25 screens)

MODE1: Turns on the main power of each display

REMOTE IN

REMOTE OUT

No.1 No.2

No.4 No.3

Display 1

No.1 No.2

No.4 No.3

Display 4

REMOTE

OUT

REMOTE

IN

REMOTE

OUT

REMOTE

IN

No.1 No.2

No.4 No.3

Display 2

No.1 No.2

No.4 No.3

Display 3

REMOTE OUT

REMOTE IN

delayed.

MODE2: Turns on the main power of each display more delayed.

* Once this function has been set to “ ON” , POWER ON/

OFF button on the remote control does not function

except for the No.1 monitor.

By pressing the POWER ON button on the remote

control the No.1 monitor will turn on and the others

OFF: Disables Auto ID function.

will be turned on one by one automatically.

* From the second monitor onward, neither the POWER

button on the unit nor the POWER ON button on the

remote control works. However, by pressing and holding

the POWER ON button for more than 3 seconds, the

monitor will be turned on.

Downloaded From TV-Manual.com Manuals

E-30

4-34

Page 34
Image 34
NEC PX-61XM3G user manual DISP. Mode settings, Auto ID settings, Image Adjust settings, On Delay settings