LAN SETTING | When you use this function, EXTERNAL CONTROL should be “LAN”. |
| |
|
| NOTE: When changing the LAN SETTING, you need to wait several seconds until the LAN |
|
|
| SETTING is applied. |
|
|
|
|
|
| DHCP | Enabling this option automatically assigns an IP address to the monitor from your DHCP server. | DISABLE |
|
| Disabling this option allows you to register the IP address or subnet mask number obtained from |
|
|
| your network administrator. |
|
|
| NOTE: Consult your network administrator for the IP address when “ENABLE” is selected for |
|
|
| [DHCP]. |
|
|
|
|
|
| IP ADDRESS | Set your IP address of the network connected to the monitor when “DISABLE” is selected for | 192.168.0.10 |
|
| [DHCP]. |
|
|
|
|
|
| SUBNET MASK | Set your subnet mask number of the network connected to the monitor when “DISABLE” is | 255.255.255.0 |
|
| selected for [DHCP]. |
|
|
|
|
|
| DEFAULT GATEWAY | Set your default gateway of the network connected to the monitor when “DISABLE” is selected | 192.168.0.1 |
|
| for [DHCP]. |
|
|
|
|
|
| DNS PRIMARY | Set your primary DNS settings of the network connected to the monitor. | 0.0.0.0 |
|
|
|
|
| DNS SECONDARY | Set your secondary DNS settings of the network connected to the monitor. | 0.0.0.0 |
|
|
|
|
SETTING COPY | In a daisy chain scenario, select the OSD menu categories that you want to copy over to the | NO | |
|
| other monitor. |
|
|
| NOTE: When you use this function, EXTERNAL CONTROL should be |
|
|
| This function resets to default when power is off. This function has a limit depending on the cable |
|
|
| you use. |
|
|
|
|
|
| COPY START | Select “YES” and press the SET button to start copying. |
|
|
|
|
|
| ALL INPUT | All input terminals settings are copied when you select this item. Default is off. |
|
|
|
|
|
RESET | Resets “MULTI DISPLAY” options back to factory settings except LAN SETTING. | - | |
|
|
|
|
DISPLAY PROTECTION |
| ||
POWER SAVE | Sets how long the monitor waits to go into power save mode after the signal is lost. | ON | |
|
| Note: When connecting DVI, the video card might not stop sending the digital data even |
|
|
| though the image might have disappeared. If this occurs the monitor will not switch into power |
|
|
| management mode. |
|
|
|
| |
HEAT STATUS | Displays status of the FAN, BACKLIGHT and TEMPERATURE. | - | |
|
|
| |
FAN CONTROL | Cooling fan reduces the temperature of the display to protect from overheating. | AUTO | |
|
| If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed. |
|
|
|
| |
SCREEN SAVER | Use the SCREEN SAVER function to reduce the risk of Image Persistence. |
| |
|
|
|
|
| GAMMA | The display gamma is changed and fi xed when “ON” is selected. | OFF |
|
|
|
|
| BACKLIGHT | The brightness of backlight is decreased when “ON” is selected. | OFF |
|
|
|
|
| MOTION | The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) at | OFF |
|
| user determined intervals. You can set interval time and zooming ratio. |
|
|
| This function is disabled when PIP, STILL, TEXT TICKER or TILE MATRIX are enabled. |
|
|
|
|
|
SIDE BORDER COLOR | Adjusts the color of the side borders when a 4:3 image is displayed. | 15 | |
|
| Press + button, the bar will become lighter. |
|
|
| Press - button, the bar will become darker. |
|
|
|
| |
AUTO BRIGHTNESS | Adjusts the brightness level according to the input signal. | OFF | |
DPORT, DVI, VGA, RGB/HV inputs only |
|
| |
|
|
| |
CHANGE SECURITY | Allows the security password to be changed. | - | |
PASSWORD | The factory preset password is 0000. |
| |
|
|
| |
SECURITY | Locks the security password. | OFF | |
|
|
| |
DDC/CI | ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor. | ENABLE | |
|
|
| |
ALERT MAIL | Selects whether or not to send an | OFF | |
|
|
| |
RESET | Resets the following settings within the DISPLAY PROTECTION menu back to factory | - | |
|
| setting: POWER SAVE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR, |
|
|
| AUTO BRIGHTNESS, DDC/CI. |
|
|
|
|
|
|
|
|
|
English
