NEC V422, V551, V651 English-27, HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only

OVER SCAN			Some video formats may require different scanning modes in order to best display the image.	ON
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2,
S-VIDEO inputs only
			Image size is larger than what can be displayed. The image edge will appear cropped.
	ON
			Approximately 95% of the image will be shown on the screen.
	OFF		Image size stays within the display area. The whole image is displayed on the screen.
			NOTE: When you use a computer with HDMI out, please set “OFF”.
OPTION SETTING			You can set this setting when option board accessory is connected to the monitor.	-
			Please contact your supplier for detailed information about Option board slot accessories.
	OPTION POWER		Allow the monitor to supply power to Option board slot during power save mode or standby	OFF
			mode.
	INTERNAL PC		The function is available for slot 2 type PC.
		OFF WARNING	If OPTION POWER is OFF, a warning message appears when monitor power is turned off.
			NOTE: Warning message does not appear when monitor power is turned off by OFF TIMER
			setting or SCHEDULE setting.
		AUTO OFF	Monitor power is automatically “OFF” when connected PC is OFF or the monitor is in power save
			mode.
		START UP PC	When ON is selected, connected PC start-up.
		FORCE QUIT	When ON is selected, it performs force quit PC.
120Hz (not adjustable)				-
MURA COMP (not adjustable)				-
RESET			Resets the following settings within the ADVANCED OPTION menu back to factory setting:	-
			INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING,
			DEINTERLACE, COLOR SYSTEM, OVER SCAN, START UP PC in OPTION SETTING and
			FORCE QUIT in OPTION SETTING.
FACTORY RESET			Resets OSD options back to factory settings EXCEPT FOR: PICTURE MODE, VOLUME,	-
			SCHEDULE SETTINGS, DATE & TIME, ASPECT in PIP, SUB INPUT in PIP, LANGUAGE, LAN
			SETTING, OSD ROTATION, CHANGE SECURITY PASSWORD and SECURITY.

English

English-27