Connecting Your DVD Player

RGB IN

Optional 15-pin-to-RCA (female)￿3 cable (ADP-CV1)

Component video RCA￿3 cable (not supplied)

Audio Equipment

 

DVD player

 

AUDIO IN

 

 

L R

AUDIO OUT

Component

 

L R

Y Cb Cr

Audio cable (not supplied)

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCA￿3) and the optional 15-pin-to-RCA (female)￿3 cable to connect your DVD player to the RGB IN connector on the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.

E-15