CAUTION

Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.

ZoomUse the ZOOM lever to finely adjust the image size on the screen.You can use the ZOOM lever to enlarge or reduce an image size.FocusUse the FOCUS ring to obtain the best focus.
2. Turn off the Auto Keystone function.

Use the SELECT H button to select “Image” and then press the SELECT E button. The “Auto Keystone” will be displayed. Press the SELECT E to select “Off”.

3. Select the Keystone function.

Correcting the Vertical Keystone Distortion

Auto Keystone Correction

The Auto Keystone correction feature will correct the vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface.

Note that the vertical keystone angle can be corrected between 30 degrees upward and 30 degrees downward of projector tilt from level.

NOTE: Keystone correction angle could be less than 30 degrees for some signals that have a high resolution or frequency such as UXGA.

Use the SELECT H button to select “Keystone”.4.Correct the vertical distortion.Use the SELECT F or E button to correct the vertical keystone dis- tortion.

Manual Keystone Correction

You can also correct the vertical keystone distortion manually.To do so:1.Press the MENU button. The menu will be displayed.5. Press the MENU button to close the menu.

NOTE: You can save the changes using the Keystone Save feature when you turn off the projector.

E-19